[Elecraft] K2 with XV50 and XV144

[Don Wilhelm]

  David,

On some XV transceivers, the "COR" is too sensitive, and in some cases I 
have been able to attribute it to RF getting back into the 
microprocessor on the front panel board.

Try putting a bypass capacitor (.001 uF) between the collector and 
emitter of Front Panel Q7 and see if that cures it.

73,
Don W3FPR

On 5/22/2011 11:41 PM, David Heinsohn wrote:
> I have a problem, though I think it's minor, but irritating.
>
> I have both of the above transverters.  They are plugged into the K2 per
> the manual with the K60XV.  I was experiencing IF Overload as described
> on page 17 of the Owners manual,  all LEDs flashing, when sending CW.  I
> changed JP1 to the 200 ms second delay which helped but did not fully
> solve the problem.  Any ideas whats causing this?  Oh, my logging
> program reads the K2 for various inputs on the same cable as the xverter
> cable.
>
> Thanks for the inputs,
> I want a KX3 for KB4WYR!!
>
> David
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1375 / Virus Database: 1509/3654 - Release Date: 05/22/11
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>