[Elecraft] K3 RTTY Decode Not Woirking

[Rick Prather]

Jim,

Is the baud rate set to 45 or 75? 

Rick,
K6LE


On 5/21/2011, at 6:25 , Jim Brown wrote:

> I've got two K3s in an SO2R setup. RTTY decode does not work with either 
> one. It's turned on, I'm using the lowest tone set (915 Hz), set for 170 
> Hz shift. Plenty of signal, CWT is on and centered. MMTTY decodes very 
> well. Decoder simply dumps out random characters.  I've played with the 
> threshold settings, and with AF and RF gain settings. Tried AFSK A and 
> FSK D, no difference in decode.
> 
> Any ideas?
> 
> 73, Jim K9YC
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html