[Elecraft] K3 ESD safety

[FRED TOWNSEND]

I don't know of anything particularly ESD sensitive on the tuner but foil 
certainly won't hurt. You are already doing the right things with the wrist 
strap etc. A few ESD prevention personal caveats (the proof is left to the 
reader):

	1. Avoid Styrofoam or similar plastics like the plague. Don't even have a 
coffee cup on the bench.
	2. Never work when the relative humidity is less than 50%.
	3. Never wear silk or nylon, or other synthetic garments. Wool is not real 
great either. Stick to cotton. Cotton blends are OK too.de Fred, AE6QL





________________________________
From: Rick Dettinger <k7mw78 at gmail.com>
To: elecraft at mailman.qth.net
Sent: Tue, May 10, 2011 2:57:44 PM
Subject: [Elecraft] K3 ESD safety

Hello,

I am removing the antenna tuner from my K3 and would like information  
on how to protect the module from ESD after removing it from the  
transceiver.  I use the wrist strap and mat, so I am talking about  
storage and shipment.  Should I wrap it in aluminum foil before  
putting it in a baggie?  Obviously, I didn't save the original  
protective bag.  Any ideas?

73 and Thanks,

Rick Dettinger   K7MW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html