[Elecraft] Anderson Powerpole voltage loss

[Gary Gregory]

The gentleman also discovered the contacts were "dirty", after cleaning they
showed normal and expected voltage...:-)

aaah..housekeeping chores are a necessity of life....but why are we so
prodded by our XYL's...?  (Grin)

Gary

On 18 May 2011 14:23, Greg <ab7r at cablespeed.com> wrote:

> Dale,
>
> Also make sure the pins are fully inserted into the plastic housing so that
> you hear it snap in.
>
> 73
> Greg
>
>
> On Tue, May 17, 2011 at 6:00 PM, Dale <vk4dmc at gmail.com> wrote:
>
> > A fellow ham here in VK recently complained of a significant voltage
> > drop (2V) through Anderson Powerpole connectors. Has anyone else
> > experienced this on the powerpole connectors fitted to the K3 or
> > elsewhere for that matter?
> >
> > --
> > 73
> >
> > Dale - VK4DMC
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 

VK4FD - Motorhome Mobile
Elecraft Equipment
K3 #679, KPA-500 #018
Living the dream!!!