[Elecraft] K3 always in TX with WSJT

[Joe Subich, W4TV]

> I'm not 100% clear on WHEN that option would be used in preference to
> COM port PTT, but, with WSJT it is clearly a problem.

The Sound card PTT option is useful for software that has no other PTT
support - or no means of PTT support *except* CAT commands with rigs
that don't support PTT via CAT (e.g., old Icom, etc.).

73,

    ... Joe, W4TV


On 5/13/2011 10:33 AM, Stan Gibbs wrote:
> Joe,
>
> Thanks for the response, you were 100% on target!  I was a bit lazy, I
> guess, when I set up the preset for WSJT, and didn't clear the "Sound card
> PTT" check box on the PTT tab.  I'm not 100% clear on WHEN that option would
> be used in preference to COM port PTT, but, with WSJT it is clearly a
> problem.
>
> WSJT is working great, thanks!!
>
>
> Joe Subich, W4TV-4 wrote:
>>
>> Do you have "Sound card PTT" checked on the PTT tab in microHAM Router?
>>
>
>
> -----
> 73, Stan - KR7C
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-always-in-TX-with-WSJT-tp6358024p6359649.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>