[Elecraft] A&A Engineering Charger + KBT2

[Brian - N5BCN]

Hi all,

A&A Engineering's "QRP Smart Charger" has the option to be built using two
of the four charging rates: 0.250 A, 0.500 A, 0.750 A, and 1.00 A.  I plan
to run my K2 using a KBT2 + Charger combo.

Which two charging rates would be suit this setup?  My K2 has a number of
options and draws about 380 mA right now on receive, considerably more when
the remoted KPA100 goes into high power mode (remoted KPA100 obviously runs
on a different power source).

I've read W3FPR's Smart Charger Mod and he's using 250 mA, so I'm leaning
towards the 250 mA/500 mA combo, however, I don't think his mod is used in
conjunction with a remoted KPA100.

73

N5BCN - Brian

-----
K2 #6800 KPA100/KAT100-2, KSB2, KAT2, KIO2, K160RX, KNB2, KAF2, LP-PAN/K2 w/ Pre-amp, SignaLink USB
--
View this message in context: http://elecraft.365791.n2.nabble.com/A-A-Engineering-Charger-KBT2-tp6342835p6342835.html
Sent from the Elecraft mailing list archive at Nabble.com.