[Elecraft] [K3] Multiple error messages on start up.

[Don Nesbitt]

Tom - I had similar problems and applied Tom's "fix" - so far (about 4 weeks later) all is well!  73 -- Don N4HH  K3/100 #83


From: Tom Boucher <tom at telemetry.demon.co.uk>
To: Reflector Posting Elecraft <Elecraft at mailman.qth.net>
Sent: Thursday, May 5, 2011 3:16 AM
Subject: [Elecraft] [K3] Multiple error messages on start up.

John,

I had similar problems for a long while which were all solved by removing the front panel, cleaning the 4 connectors and applying some electrical lubricant (Contralube) and re-assembling.

Good luck!
Tom G3OLB

Message: 35
Date: Wed, 4 May 2011 22:28:29 -0400
From: John Shadle <shadle at katzenfisch.com>
Subject: [Elecraft] [K3] multiple error messages on start-up
To: elecraft at mailman.qth.net
Message-ID: <BANLkTikaKW3MY_B1gw1CfQtVM2B+gYmNTA at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

This is odd. Just finished a QSO with J5UAP on 30m this evening and
then switched over to 40m to pursue some more DX. When I got there, I
wasn't able to get any power out. It showed 0.0W when I tried to TUNE
(I have a remote tuner at the base of my vertical).

I power cycled the radio and then received a multitude of errors upon
power-up (including ERR IO1 and ERR PL1 among others). In addition to
that, the fans were running (I have the 100w amp as well).

I turned the radio off for a minute or so, and now the error has
resolved. I've had the issue of the no power out when TUNE-ing in the
past, but never this before.

Help!
-john W4PAH
K3 #110

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html