[Elecraft] [K3] multiple error messages on start-up

[John Shadle]

Add to this the fact that the radio now is only putting out 12W
instead of 100W. :-(

Thanks for any assistance.

-john W4PAH

On Wed, May 4, 2011 at 10:28 PM, John Shadle <shadle at katzenfisch.com> wrote:
> This is odd. Just finished a QSO with J5UAP on 30m this evening and
> then switched over to 40m to pursue some more DX. When I got there, I
> wasn't able to get any power out. It showed 0.0W when I tried to TUNE
> (I have a remote tuner at the base of my vertical).
>
> I power cycled the radio and then received a multitude of errors upon
> power-up (including ERR IO1 and ERR PL1 among others). In addition to
> that, the fans were running (I have the 100w amp as well).
>
> I turned the radio off for a minute or so, and now the error has
> resolved. I've had the issue of the no power out when TUNE-ing in the
> past, but never this before.
>
> Help!
> -john W4PAH
> K3 #110
>