[Elecraft] KAT2

[Don Wilhelm]

  Peter,

I forget what the E000 error really means, but those kind of errors come 
from the option firmware.
If you have a 'scope with a 10x probe, you can check for oscillation at 
the resonator pins (or U1 pins 13 and 14).
Check your cable connections and your soldering for potential problems, 
and if you find none, ask parts at elecraft.com for a replacement KAT2 
firmware IC and a new resonator.

73,
Don W3FPR

On 5/2/2011 11:54 AM, Peter Wierach wrote:
> Hi,
>
> I need some help. I just finished KAT2 and got a lot of problems. Befor
> I explain,
> I get the message E000 in the menu, what does it mean?
> Is there a problem with the MCU?
>
> 73 Peter, DF8BB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>