[Elecraft] [K2] protruding pushbuttons difference - PP5RLC

[Don Wilhelm]

  Vagner,

That can happen if you did not seat the LCD down close enough to the 
board and it contacts the metal of the front panel.  The pins of the LCD 
normally are flush with the back side of the board.

73,
Don W3FPR

On 5/2/2011 6:25 AM, Vagner Emílio Fischer wrote:
> Hello there,I've just put K2 SN 7063 on the air, great rig. I only found strange that the pushbuttons are not protruding out the same - the buttons near left and right edges are more "out" than the buttons near the display. I used the switch spacing tool, the 2D fasteners are hole-to-hole, the rubber bumpers are in place, and the J connectors are all fitting 100%. Does anyone know what I did wrong, or is it supposed to be like this?de PP5RLC  -   Vagner 		 	   		
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>