[Elecraft] [K3] LDG Z-11ProII as remote tuner with K3?
Ross Primrose N4RP
n4rp at aiko.com
Tue Mar 29 09:21:42 EDT 2011
On 3/28/2011 12:04 PM, William Ravenel wrote:
> I need a remote tuner setup for an inverted-L antenna and am considering a battery powered LDG Z-11ProII. I like the compact size and QRP capability of this tuner. Does anyone have any experience with this tuner used remotely or have any other suggestions that I should look into?
>
> Thanks - Will, AI4VE
I've been using a Z11 Pro (not II) for the last 6 months or so at the
base of my 3/8 wave 160m inverted L. Since the L is 3/8 wave, I needed
to add a cap in series with the tuner output (can't remember if it was
220pf 0r 330pf), then into a broadband 1:1 transformer so the L is at DC
ground to prevent static buildup. It's worked quite well for me, just
last night I worked a VK3 from Virginia on 10m, 5W JT65....
73, Ross N4RP
--
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”
More information about the Elecraft
mailing list