[Elecraft] Not hearing signals in K2 with EC2 enclosure KPA100/KAT100 combo

[Alan D. Wilcox]

Brian,
Perhaps a photo or two might help. 
http://wilcoxengineering.com/amateur-radio/kpa100inec2
Cheers,
Alan

Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://eBookEditor.net
https://www.smashwords.com/books/view/28062?ref=awilcox
Williamsport, PA 17701


On 3/28/11 8:28 AM, Brian Pepperdine wrote:
> On the weekend, I picked up  a nice K2 set - a K2 with internal tuner and battery, plus the remoting of the
> KAT100 and KPA100 built into an EC2 enclosure.
>
> All set up for QRP in  field/portabl/patio or full 100 watts in the shack.
>
>
>
> But an odd thing... this all came from a very reliable ham (a techical guy of long standing circa. 1957 onward) and it was
> built according to the KK7P web page guidelines, with a printout of Lyle's pages on this from the web site.
>
> It does NOT hear RF signals when in the paired mode with amp/tuner connected.
> I have it set up as per the photos.. with DB9 cable between the I/O Aux jacks on the PA/KAT and the base K2, and antenna attaches to ANT 1 UHF jack on the PA/KAT box.
>
> I hear RF fine if I put the antenna line on the basic K2 BNC Antenna 1 jack, but nothing heard in the full setup.
>
> I read the pages.. it seems the K2 is to have the tuner set at CAL from what I read, but whether in CAL or in Auto.. I still get nothing heard.
>
> I am assuming the RF somehow, somewhere passes from the K2 to the PA/KAT via this IO Aux line?
>
> Any ideas...?
>
> I figured it would be all ready to go.. sort of direct from his shack table onto mine, but something seems amiss.
>
> tnx
> Brien
> VE3VAW
>