[Elecraft] Flashing red Led

[Brian & Cyndi]

And to actually answer the poor guy's original question,

"While messing around at the back of the rig I noticed through the 
cutouts at the back of the P3 that there is a pulsing red light inside 
of the P3. Is this normal? Thanks.

K6CG"


there should be TWO LED's that flash alternately back and forth.  They 
are indicators that the P3 is operating normally.  To see only one lit 
steady is an indication of a fault.

You may now resume the geezer jokes.

73,
Brian, W6FVI


On 3/26/2011 8:23 PM, Don Cunningham wrote:
> Richard,
> To answer your original question (which nearly NEVER happens on this list),
> mine does the same and hasn't blown up.  I wouldn't worry about it as we
> know two do it.
> 73,
> Don, WB5HAK
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>