[Elecraft] Anderson Powerpoll connector

[Bill]

Nate,

I think it is ok to solder, but use some thick walled heat shrinking out a
distance from the connector to provide some strain relief.  This would also
hold the poles together.

Bill
K9YEQ


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Nate Bargmann
Sent: Friday, March 25, 2011 7:29 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Anderson Powerpoll connector

I concur,  Crimp connectors should never be soldered under any
circumstances.  Get the proper tool or use a solder type connector.

This valuable advice comes from both my professional and amateur experience.

73, de Nate >>