[Elecraft] OT Hearing HRD Communicate w/K3

[Jim Brown]

On 3/18/2011 9:11 PM, Leigh L. Klotz Jr WA5ZNU wrote:
> I found that paying attention to cable dress helps; i.e., route your RS232 and USB cables away from (perhaps at right angles to) the audio cables.

That's another symptom of Pin One problems in the equipment where both 
cables are connected. That is, one cable is radiating the RF and the 
other is receiving it. If the equipment was built properly, that should 
not matter.

73, Jim K9YC