[Elecraft] [K3] Reconfiguring band boundaries

[Ross Primrose N4RP]

If you're experimenting with various computer controls, that's what TX 
Test mode is for!

73, Ross N4RP

On 3/17/2011 3:08 PM, Don Wilhelm wrote:
>    Thomas,
>
> If you are "experimenting with various computer controls" and you have
> the "out of band" concern, I would think the place to place the band
> limits would be in the computer application.  I know Ham Radio Deluxe
> has provisions for setting band limits for you.
>
> 73,
> Don W3FPR
>
> On 3/17/2011 2:17 PM, Thomas Horsten wrote:
>> In short there are many ways to make a mistake, especially when (like
>> me) you are experimenting with various computer controls etc.,
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”