[Elecraft] [K3] decisions, decisions

[Ross Primrose N4RP]

 From http://www.elecraft.com/PR6/pr6.htm :

"The PR6 is a high-performance, low-noise 6-meter preamp that can be 
used with the Elecraft K3 and most other 6- meter capable transceivers. "

If it's not accurate, I'm not the guy you need to tell...

73, Ross N4RP

On 3/15/2011 4:24 PM, Wes Stewart wrote:
> I suppose that is technically correct, if you use it with a 15-watt radio or external T/R switching.
>
> --- On Tue, 3/15/11, Ross Primrose N4RP<n4rp at aiko.com>  wrote:
>
>
>> On 3/13/2011 11:57 AM, Pierfrancesco
>> Caci wrote:
>>> Wes, you mail made me realize I was doing a mistake.
>> The PR6 needs the
>>> KXV3, so I have to rule that out on a (not enough)
>> money basis.
>> The PR6 does NOT need the KXV3, but can pass the
>> transverter functions
>> trough. The PR6 can be used with any 6M radio...
>>
>> 73, Ross N4RP
>
>


-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”