[Elecraft] PLL upgrade board on K2 7109

[Don Wilhelm]

  Ed,

Your tight 90 degree bends alone will do the job.  There will be space 
for RFC14 and the capacitor at its end too even though it is a tight fit 
for the capacitor - it is not too tight.
I just finished a K2 RF board a few minutes ago, and had put RFC14 and 
the capacitor in yesterday and had no problem.

73,
Don W3FPR

On 3/13/2011 4:48 PM, EMD wrote:
> Okay I'm getting ready to install the PLL upgrade board and it looks to me
> like this has the potential of being a problem.  I have test fit the
> Thermistor PC board and I can see why the instructions call for the board to
> lean slightly towards U6.  The problem I see is the position of RFC14 and
> the PC board.  Any tips in getting it installed correctly.  One thing I have
> done is to make sure the leads coming out of the board make a tight 90
> degree bend out of the board as to give me better spacing on RFC14.
>
> 73,
> Ed KE7HGA
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/PLL-upgrade-board-on-K2-7109-tp6163532p6167096.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>