[Elecraft] [P3] Centering the cursor on VFO frequency ?

[Joe Subich, W4TV]

 > Pressing (actually holding) CENTER _twice_ will do it.

No, holding Center twice will center the *carrier.*  If
one is in SSB or DATA A, the cursor will be offset to one
side of the display.

It is actually impossible to look at an entire SSB (or data)
signal with the span set to 3 or 4 KHz.  I ran into that
last night ... I heard a badly distorted signal and wanted
to capture it full span width and it was not possible to
offset the "center" enough manually to move the carrier to
the left edge of the graticule.

73,

    ... Joe, W4TV


On 3/13/2011 1:37 PM, Stephen Prior wrote:
> Phil
>
> Pressing (actually holding) CENTER _twice_ will do it.
>
> 73,
>
> Stephen G4SJP
>
> On 13/03/2011 17:11, "Phil Hystad"<phystad at mac.com>  wrote:
>
>>
>> After the update that gave us the ability to shift VFO frequency without
>> the spectrum changing, there are times that I want to recenter the cursor
>> on the VFO frequency -- especially if I am using a narrow spectrum width
>> in order to view the spectrum shape of a signal.
>>
>> I can do this by pressing the Center function and using the knob to
>> recenter the cursor.
>>
>> But, I would like to do it with a single command button?  Is there a way
>> to do this?  I have experimented but I can't seem to find a method that
>> DOES NOT require me to manually adjust the cursor location using the knob
>> on the P3.
>>
>> Thanks for help or pointers to where I can read up on how to do this?  So
>> far, not found the right section if it exists.
>>
>> 73, phil, K7PEH
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>