[Elecraft] [K3] decisions, decisions

[Jim Brown]

On 3/13/2011 9:52 AM, John Ragle wrote:
> I typically run my K3 at 35 to 40 watts, with about 20
> watts on 6 meters, because that is what it takes to drive my 6 meter
> amp, when needed.

Yes. Most of the better ham power amps can be driven to at least 
250-350W with the output of a barefoot K2 or K3. (the limit on power 
gain is set in FCC Rules) If you already have a power amp, it's quite 
reasonable to put off buying the 100W output stage.

73, Jim K9YC