[Elecraft] Macro for Power Output

[goldtr8 at charter.net]

What is the K3 macro command set for setting power?

I would think if I had that info I could also build a macro in HRD.

Don
KD8NNU


On Sat, Mar 12, 2011 at 1:53 PM, K8AC wrote:

> At least one logging package, DXLab, provides the necessary 
> conditional
> statements that allow you to build scripts attached to buttons or 
> sliders
> that can accomplish this.  For example, I have one button that appears 
> in
> the "Commander" (the DXLab application that does PC to K3 
> communications)
> window  that reads the band the K3 is set to and then sets the power 
> out to
> the value that produces just under the legal limit for my amp on that 
> band. Using the same facility, you could define a "slider" control 
> that would
> increment or decrement the power level by a fixed value each time it 
> was
> moused.  Or, you could drag the slider to set any desired power level. 
> Since standard K3 commands are used, when the power level is changed 
> via one
> of these controls, the new power level is displayed on the VFO-B 
> section of
> the display just as if you had turned the PWR knob.
> 73, Floyd - K8AC
>
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/Macro-for-Power-Output-tp6164356p6164855.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html