[Elecraft] K3 transmit/amplifier relay

[Joe Subich, W4TV]

 > It has been reported before but not yet fixed.

Nothing to be fixed.  The line is "Key Out" - not amplifier PTT.

73,

    ... Joe, W4TV

On 3/11/2011 4:03 PM, Gary Hinson wrote:
>
> It's 'normal' Sy, unfortunately.
>
> It has been reported before but not yet fixed.
>
> 73
> Gary  ZL2iFB
>
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net
>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Sy Botan
>> Sent: Saturday, 12 March 2011 9:41 AM
>> To: elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] K3 transmit/amplifier relay
>>
>> Most of my operating is on CW.  While staying in the CW receive mode I
>> operate the paddle to adjust speed and monitor level.  The
>> transmit relay
>> activates and the amplifier relay also is activated.  Being in the CW
>> receive mode there is no RF output but the relay clanking is annoying.
>> Neither VOX or QSK is selected.  I tried to find some menu
>> item that might
>> have an affect on the relay activation.  Did I overlook
>> something or is this
>> normal?
>>
>> Tnx de Sy K6PWP # 5223 (one week old)
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>