[Elecraft] K3 turns it self on, won't turn off

[Don Wilhelm]

  Jeff,

Certainly you could try re-seating that board, but I would be more 
inclined to look for something on that board which could cause a short.  
Re-seating will often correct an open circuit condition, but a short to 
ground is a different animal.  If you find any bits of conductive 
material floating around, that would be suspect.

73,
Don W3FPR

On 3/9/2011 7:58 PM, Jeff Kinzli N6GQ wrote:
> Hi Don, yes, I have checked this - there is nothing connected to the
> ACC connector or the RS232 port when this occurs.
>
> Perhaps the board that the ACC connector is attached to needs to be
> reseated? Any other ideas?
>
> Thanks,
>
> Jeff
>