[Elecraft] LineOut on transmit

[Dick]

Jack,

Good question,  that has never crossed my mind;  but now that you mentioned
it, I notice the same thing.  In my case, it is when on RTTY.  For RTTY I am
using the US Interface Navigator and have both the main and sub line outs
connected to it.  Am using MMTTY and have two programs installed (different
directories so I can open both at the same time).  One is for the main
receiver and for transmitting (left ch), and the other is for the sub
receiver (right ch).

I notice than when I transmit (as you observed), the K3 is sending audio out
the line out on the sub side. And even if the sub receiver is turned off.
Thus I "see" what I am transmitting on both MTTY displays.

Dick  K8ZTT

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of k1vt
Sent: Wednesday, March 09, 2011 9:50 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] LineOut on transmit

I am enjoying my new K3/P3 that I received a little over a week ago. 
Although most of my questions have been answered by the manual or by
experimentation, I have several unanswered questions at this time relating
to LineOut:  

1) Is it normal to have audio coming out of LineOut while transmitting?  I
observe this on both SSB and CW.

2) While receiving, audio from LinOut is from the left channel only, as
expected.  However, while transmitting equal audio (my TX audio, either SSB
or CW) comes out of both channels.  Is this normal? 

Thanks.

Jack K1VT

--
View this message in context:
http://elecraft.365791.n2.nabble.com/LineOut-on-transmit-tp6154400p6154400.h
tml
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html