[Elecraft] K2 & K3 Rig Control

[Bill Allen]

Thanks for the info.   I am writing some code to read and control the K2,
but thought it would be good to also handle the K3 while at it.


73,
Bill - WA5PV







On Tue, Mar 8, 2011 at 13:56, Mike <nf4l at nf4l.com> wrote:

> Bill.
>
> The K3 connects to a computer thru a DB9 connector for RS-232
> communication. The K3
> and K2 share some of the commands. Take a look at the K3 programmers manual
> at
> http://www.elecraft.com/manual/K3_Pgmrs_Reference_Rev_C14.pdf.
>
> 73, Mike NF4L
>
> On 3/8/2011 2:40 PM, Bill Allen wrote:
> > Does the K3 have a port like the KIO on the K2?   Are the settings to
> > connect and the rig commands the same?
> >
> >
> > 73,
> > Bill - WA5PB
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>