[Elecraft] [K3] Mic Experimentation with Kenwood MC-60

[Phil Hystad]

George,

Thanks for the settings you quoted below on your mic.  Yes, my mic actually
works and I am learning that my errors may be in thinking that I do not have
to talk close to the mic.

I am continuing to experiment today but it will have to wait, taking my wife
out on a bird photography trip up in the Skagit Flats.

73, phil, K7PEH


On Mar 5, 2011, at 11:19 PM, George A. Thornton wrote:

> I have a Kenwood MC-60, I bought it new about a year ago for use with an
> older Kenwood 930s.  It has been used lightly and is in good condition.
> 
> I just tried it on my K3, it works fine for me with the mic preamp off
> and the K3 set for FP L.
> 
> I am driving it with mic gain set at about 23, compression high 20's.
> Audio sounds fine when I test transmit and use the monitor feature to
> hear myself.
> 
> During transmit, I am getting strong power out.
> 
> This mic has not been modified and the pinouts are as delivered from the
> factory.
> 
> There is an on-off button on the mic, leave that off.  There seems to be
> no difference whether setting the mic for 50 or 500 ohms.  
> 
> You do need to speak close to the mic when transmitting, it is designed
> for that kind of use.
> 
> Maybe there is something wrong with the mic you are using.
> 
> 
> 
> 
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Phil Hystad
> Sent: Saturday, March 05, 2011 8:02 PM
> To: Elecraft Reflector
> Subject: [Elecraft] [K3] Mic Experimentation with Kenwood MC-60
> 
> So, I asked a question late last night but no responses.  So, either no
> one cares or maybe I got lost in the noise.  But, that is OK -- I will
> try again.
> 
> I am confused and mystified by a mic that I borrowed from a friend to
> try out with the K3.  It is a Kenwood MC-60 and I think it is fairly new
> and I only have a day or two to play with this so I want to make use of
> that time.
> 
> I am discovering that I don't understand all there is about microphones
> and the K3.  For example, when you use the MENU to set the Mic to
> something like FP.L or FP.H, what is the true meaning of the L and H.  I
> know that the document says Low gain and High gain but how am I to
> interpret this.  Does H mean that the mic has high gain or does it mean
> that it needs high gain.
> 
> This MC-60 mic has a preamplifier on it and when this amp is off, I have
> trouble getting the ALC meter to measure anything.  I do the test of
> speaking normally into the mic but with the mic gain set to 60 I have to
> either shout or speak VERY CLOSELY to the mic to make the ALC meter move
> at all.  This does not seem right.  I get the same behavior whether the
> mic setting is FP.L or FP.H.  By the way, Bias is set off as I believe
> it should be with a dynamic mic.
> 
> Now, I have done some tests on-air with a few friends and they say my
> audio sounds OK.  Right now, I have the compression either zero or very
> low and I am forgetting which audio report I got with which setting.
> But, the compression setting didn't seem to make a whole lot of
> difference.
> 
> Also, another question --- this mic has a preamp and I am wondering if
> there is wisdom in using the preamp versus the mic gain set to a high
> value on the K3.
> 
> And, lastly -- I checked the history of some discussion on Kenwood mics
> and the K3 and I see there is some discussion about the pin wiring of
> whether pin 5 is used or pin 6 for something or other.  I was under the
> impression that the K3 was using the Kenwood mic wiring so what is this
> question on pin 5 versus pin 6?
> 
> Yes, when it comes to microphones I do not know very much.  I am about
> 90 percent CW so I obviously do not care about audio too much but I do
> want things to sound OK without over driving the K3.
> 
> 73, phil, K7PEH
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html