[Elecraft] K3 does not transmit (FSK) on lower bands?

[Axel Kaiser]

Thank you Greg, Joe and Richard, you solved my problem. 
In fact, the DATA MD setting was different on the lower bands for some reason. Actually I didn't know that this setting is band dependent.

I checked the manual again and didn't find any remark to this respect in the Data Modes chapter.
Anyway thanks again, you've made my day!!! This reflector is a marvelous thing!


73 de Axel DL3ZH

> Date: Sat, 5 Mar 2011 23:43:19 -0500
> From: ve3iay at storm.ca
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 does not transmit (FSK) on lower bands?
> 
> Axel,
> 
> The K3 remembers the DATA submode separately for each band. Perhaps you 
> have the FSK D submode selected on the higher bands, but one of the 
> other submodes selected on the lower bands.
> 
> 73,
> Rich VE3KI
> 
> 
> DL3ZH wrote:
> 
> > I am having problems with my K3 in transmitting RTTY on the lower bands (160m -30m).
> >
> > I am using MMTTY togetner with a microham microkeyerII. On the higher bands (20m-10m) \
> > RTTY works fine with the mode setting on Data and having selected FSK. But when I \
> > switch to the lower bands, the transmit LED will light, however there is no FSK \
> > shifting, no tones are being sent and no tones can be heard in the monitor either.  \
> > Transmitting voice on the lower bands is working fine though!
> >
> > I checked the menu for any band dependencies but couldn't find any that would apply \
> > to FSK transmission. Does anyone have an idea what I am doing wrong?
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html