[Elecraft] {K3} RS 232

[Dick Dievendorff]

Perhaps the Rx lines in the cable aren't connecting right.  It appears that
when the computer sends data to the K3 the radio is receiving it, because
the radio follows a bandmap click.  However the computer isn't "hearing" the
stuff the K3 should be sending.

I'd try another cable.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Adriano
Sent: Thursday, March 03, 2011 12:12 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] {K3} RS 232

Hello

Due to my problem on the KUSB adapter, i tried to connect the K3 on the PC
via a serial to serial cable (DB9 male to DB9 female).

On the N1MM i can click on a station on the bandmap and the radio follows
but when i move the dial nothing happens. Also the frequency o N1MM doesn´t
move when i turn the dial.

I checked the wires inside the cable and all of them looks ok.

On the K3 Utility nothing happens too.

Any clues pse ? The ARRL is coming and i´m desperate.

TNX de PY2ADR / ZY2C
Adriano Perazio
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html