[Elecraft] KPA-500 SN 101 On the Air

[Mike Fatchett W0MU]

The kit went together in about 5 hours.

The only sticking point I had with the build was with the Z panel.  The 
holes were not very close when attaching the back panel.

Everything else in the build was pretty straight forward.  The IO board 
had the jack screws that had to be removed before the board could be 
mounted.  It was obvious what needed to be done but the manual might 
want to warn others that this may have to be done.

Heading to the shack to test out the RF.

Mike W0MU