[Elecraft] Boots for the XG3...

[Wayne Burdick]

Just to clear this up:

1. We are *not* going to remove beacon mode (CW and RTTY text). It's  
useful for micropower beacons, T-hunts, and receiver demodulator  
testing.

2. The XG3's phase noise, about -105 dBc/Hz at all offsets above 1  
kHz, is better than that of some inexpensive radios. But it's 30 dB  
worse than the K3, so....

3. As I've posted before, you should not amplify the output to high  
levels. 100 mW to 1 W is the highest I'd recommend. And if you plan to  
leave it running, you'll need a low-pass filter to keep it legal.

73,
Wayne
N6KR