[Elecraft] Loaded K3 for sale

[Levent Sasmazel]

Just for clarification. Item is located in New Jersey (07733). Items and 
price are listed here is for the configuration information not for the 
actual price. I am open for any reasonable offer. Buyer will pay the 
actual shipment of the equipment.

Thanks,
Levent

On 06/20/2011 11:34 PM, Levent Sasmazel wrote:
> Hi,
>
> I have a fully loaded beautiful K3 for sale (S/N 1230) radio just 
> returned from Elecraft all modifications are done by the Elecraft and 
> working perfectly.
>
> Thanks and 73s,
> Levent - WW2L
> lsasmazel at comcast.net
>
> ----------------------
>
> _*K3/100 (S/N 1230)*_
>
> K3/10 (SN 1230) 10 W Transceiver, Kit *1,499.95*
>
> KPA3 /Internal 100 W //_Upgrade_//for K3/10 /*449.95*
>
> KAT3 Internal ATU with 2nd Ant. Jack *299.95*
>
> KXV3A_UPGRUpgrade from existing KXV3 to KXV3A*69.95*
>
> KDVR3 Digital Voice Recorder *129.95*
>
> KBPF3 General Coverage RX Bandpass Module *139.95*
>
> MH2 Hand Microphone(For the K3/K2) *59.95*
>
> KUSB USB (Universal Serial Bus) Adapter for the K3 *39.95*
>
> KFL3A-2.8K 2.8 kHz, Roofing Filter, 8-pole *130.95*
>
> ***TOTAL 2,820.55*
>
> *Installed all needed updates done by ELECRAFT**:*
>
> 1)AF output mod.
>
> 2)Filter caps on 8 volt regulator.
>
> 3)VFO tuning noise mod.
>
> 4)Extreme signal protection mod.
>
> 5)KSYN3 ALC mod.
>
> 6)KSYN3 DDS mod.
>
> 7)KSYN3 stiffener.
>
> 8)RF immunity mod.
>
> 9)External negative ALC mod.
>
> 10)Replaced D36,37 with current part. (watt/SWR meter)
>
> 11)Loaded 4.25 MCU 2.71 DSP.
>
> *Tests performed by ELECRAFT:*
>
> -"Receive MDS. Transmit RF output power, two tone IMD and spurious levels.
>
> -Checked functionality of all installed options including roofing 
> filters.
>
> -Ran VCO Cal. and set Ref cal. Performed TX gain cal. Checked watt 
> meter and S meter calibration.
>
> -K3 SN 1230 has been found to meet or exceed published specifications.
>
>
>
>