[Elecraft] AGC Problem

[Stephen Prior]

Since I stopped using HRD and turned Mac only, I have never once had the AGC
turning off problem repeat itself (I am using a P3 too).

Therefore I am 100% sure that it is (what others have called 'aggressive')
polling from HRD.

It might be worth installing LP Bridge, because even though you may have no
need to share a serial connection, it features buffering of the HRD data.
That way you could keep using HRD.

73 Stephen G4SJP


On 19 June 2011 09:48, Jens Petersen <ov1a at c.dk> wrote:

> On Wed, 6 Apr 2011 13:38:08 -0500, you wrote:
>
> >Going back through some notes here seems to indicate that once
> >I downed HRD while meeting the one and only SSB group I enjoy cured
> >the problem. Why it is so sensitive to only the AGC on/off I have not
> >a clue. But I had it no more after that.
>
> I have had this problem since I got my P3.
>
> I'm mostly running RTTY and other digimodes and in contests it happens
> 1 or 2 times per hour, mostly while in TX.
>
> When I switch off the P3, the problem disapper.
>
> Today I loaded firmware 1.08 in P3 and then the problem occurs several
> times per hour, just receiving.
>
> I'm using HRD.
> K3 firmware is 4.25
> --
> OV1A Jens
>
>  Sent from my desktop PC with a nice big screen and a real keyboard.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>