[Elecraft] K3 with Kenwood MC-60

[Doug Person]

My MC-60 works perfectly on my K3.  Its  very new.

Doug -- K0DXV

On 6/18/2011 1:39 PM, Jeff KB2M wrote:
>    I picked up a used MC-60 mic at Dayton. When I try to use it with my K3,
> as soon as I connect it via the 8-pin foster on the front  the frequency
> starts to scan like I'm holding down the up button on the mic. Thinking that
> there was a problem with the mic I tested it with a Kenwood TS2000 and it
> works perfectly. You push the up button and it scans up, etc. Now what
> puzzles me is that I used to own another MC-60(that I sold) and it worked
> correctly with my same K3. I'm wondering what could be causing this before I
> start to take everything apart. Anyone else run into this, does anyone have
> any ideas?
>
> 73 Jeff kb2m
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>