[Elecraft] Diversity Mode - DATA-A

[Brendan Minish]

Don't combine! when signals are present on both antennas they may cancel
out due to phase differences on arrival (&/or within the K3) 
Ideally the software should process each path separately and handle
extracting the signal 

On Wed, 2011-06-15 at 16:52 -0700, vk4cmv wrote:

> I've also set up a macro in HRD to send !BEFF to the rig which, according to
> previous posts, combines the audio in diversity mode. Having done that, I
> had this sneaking feeling that I was copying (decoding) better - but it
> could be wishful thinking and needs proper testing, not just playing around.
> 
> When I say decoding better - it's not just a matter of dBs, it's a matter of
> the reception holding together for a full 48 seconds in each minute through
> QRM & QRN.
> 
> Anyone else out there tried diversity in DATA-A?
> 
> rgds, Julian VK4CMV
> 
> PS: Any news on when VOX is going to be implemented on a per-mode basis, ie.
> DATA-A vs Phone?
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Diversity-Mode-DATA-A-tp6481155p6481155.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
73
Brendan EI6IZ