[Elecraft] Frequency Memories

[Don Wilhelm]

  Tom,

It should not be necessary to store ATU tuning in the VFO memories.

The ATU TUNE has its own set of "memory" - it remembers the L/C 
combination for any band/frequency segment/antenna that you have 
previously done a TUNE.  When the transmit VFO is returned to that 
band/frequency segment, the ATU follows with the proper L/C combination.

Of course, if you have physically changed the antenna that is used on 
that particular band segment since the last time an ATU TUNE was done, 
you will have to tap the ATU TUNE button.

73,
Don W3FPR

On 6/13/2011 2:55 PM, sq5csf at elektroda.net wrote:
> Hi All,
> In the K3 Owner's manual I found:
>
> "The K3 has 100 general-purpose memories (00-99),
> plus per-band memories (M1-M4 on each band).
> Each memory holds VFO A and B frequencies,
> modes, filter presets, antenna selection, and other
> settings."
>
> Does anyone know what kind of the other setting ?
> ATU tune setting for each memory also ?
>
>