[Elecraft] [K3] "SSB +CW" vs PTT

[Joe Subich, W4TV]

 > Bug or feature?

Feature ... PTT puts the K3 in transmit using the selected mode
(e.g., USB).  The CW input puts the K3 in transmit using CW.
That's why CW VOX (QSK or semi break-in) needs to be forced if
SSB+CW is enabled.

Unfortunately, the K3 lacks independent front and rear (mic vs.
ACC) PTT inputs so there is no way to differentiate the source
of the PTT.

73,

    ... Joe, W4TV


On 6/13/2011 3:45 PM, iain macdonnell - N6ML wrote:
> I seem to have encountered a conflict between "SSB +CW" (i.e. CW
> whilst in SSB mode - useful sometimes on 6m) and PTT. I have my K1EL
> WinKeyer configured to assert PTT during CW. It seems that CW in SSB
> mode is "muted" when PTT is asserted, so I get a short "blip", then
> stay in TX, but no CW tone. Perhaps PTT causes the source of audio to
> be "moved" to "MIC-SEL" instead of the CW tone, as opposed to a mix of
> the two? Bug or feature? Fixable?
>
>      ~iain / N6ML
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>