[Elecraft] asking for operation tips - KRX3

[Johnny Siu]

Thanks for your advice, Richard
從︰ Richard Ferch <ve3iay at storm.ca>
收件人︰ "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
傳送日期︰ 2011年06月5日 (週日) 11:18 PM
主題︰ Re: [Elecraft] asking for operation tips - KRX3


Johnny VR2XMC wrote:

> I got my KRX3 when I was in Dayton.  I now have my 20m antenna as ANT1 and 6m antenna \
> as ANT2.  While working in 20m, I would turn on 'SUB' to monitor the DX window of 6m \
> at 50.110Mhz.
> Now comes the question.  If I notice a DX call in 6m in the 'SUB', how I can quickly \
> switch the 'SUB' to main band and TX in 6m right the way answering the CQ call.

When VFOs A and B are on the same band, you can press SPLIT to transmit 
from VFO B, but this does not work when the VFOs are on different bands. 
When VFOs A and B are on different bands, you can only transmit from VFO 
A. To transmit to the station you hear from VFO B, first press A/B to 
exchange the VFOs.

>   Apart from listening 20m on one ear and 6m on the other ear, is there a way to \
> monitor the S meter reading of both 20m and 6m simultaneously?

I believe the answer to this is no.

73,
Rich VE3KI

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html