[Elecraft] D 104

[Lou Kolb]

You'd also be well advised, if its an unamplified D-104, to add one of the 
op-amp matching circuits which can be powered from the K3.  It'll make the 
D-104 look into the 10 megohms or so that it likes and it will sound much 
more natural. a Quic google search should yield a few of these circuits. 
Lou WA3MIX
----- Original Message ----- 
From: "Sam Morgan" <k5oai.sam at gmail.com>
To: <elecraft at mailman.qth.net>
Sent: Saturday, June 04, 2011 1:30 PM
Subject: Re: [Elecraft] D 104


>I use an amplified D-104 with my K3, excellent audio reports.
> I have also used an un amplified D-104, with equally good reports.
>
> Try your local radio shack for the 8 pin jack.
>
> 8-Pin Ham Microphone Plug
> Model: 274-025  | Catalog #: 274-025
> $4.19
>
> http://www.radioshack.com/product/index.jsp?productId=2062445
>
> GB & 73
> K5OAI
> Sam Morgan
>
> On 6/4/2011 12:22 PM, CHARLES WHITE wrote:
>> I would like to connect a D 104 mike to the K3 but the D 104 is a 4 pin 
>> jack and the K3 is 8 pins.
>>
>> I have not been able to find a 8 pin jack for the mike at either MOUSER 
>> or DIGIKEY suppliers.
>>
>> Does any one use the D104 with the K3?
>>
>> Any advise?
>>
>> Thanks
>>
>> Charlie White
>> K6TBB
>> San Diego
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html