[Elecraft] Pileups and the KPA500

[N3XX]

Calling on ST0R's freq happened to me a few times.  Every time I would go 
and check another band, then come back to the original band where I had been 
calling, my split would be gone.  I forgot to reset to split, and then would 
be calling on the wrong freq.  Found that I had to go into the CONFIG / SPLT 
SV menu and set it to YES, then split would be saved.
Of course now that I have it set this way, I will have to be careful when I 
qsy to a new band that split is not set when I don't want to be operating 
split.

73,
Tim - N3XX

----- Original Message ----- 
From: "briana" <alsopb at nc.rr.com>
To: <elecraft at mailman.qth.net>
Sent: Sunday, July 31, 2011 6:18 AM
Subject: Re: [Elecraft] Pileups and the KPA500


> I did hear a lot of K3's owners calling on the ST0R's frequency.
> Perhaps the K3 needs to implement true one button split out of the box.
> One shouldn't have to program bunches of function keys with little
> sticky tags on the button/panel to get there.  Besides there are not
> enough buttons to program.
>
> 73 de Brian/K3KO