[Elecraft] k3 & WWV

[Paul Christensen]

FWIW, I try and use 10 MHz as a last resort for zero-beat.  The house is 
filled with 10 MHz clocks from various electronic appliances, all of them 
being nowhere near WWV accuracy so it can make zero beat adjustments 
difficult, depending on the incoming signal strength.  However, when I make 
a check, it's when the K3 is on the 30m band.

Because of potential interference issues, including my own GPS-DO, I prefer 
to use CHU since they transmit at odd carrier frequencies that are not as 
subject to interference from nearby clocked sources.  CHU has relatively 
good coverage down to the southeast, but I also acknowledge that CHU is not 
heard in many parts of the world.

Paul, W9AC


>
> Hello,
>
> Can WWV at 10 MHz be copied on the K3 without the KBPF3 General Coverage
> Module?
>
> Thanks
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html