[Elecraft] K3/KRC2/XV144/KPA500 Combo

[Don Wilhelm]

Stan,

That is correct.
On the "strangeness", remember that the KRC2 was developed for the K2, 
and the DB-9 connector had all the pins that were needed.

73,
Don W3FPR

On 7/27/2011 5:36 PM, Stan Gibbs wrote:
> Hi Don,
>
> Thanks for the response.
>
> If I read the KRC2 and XV144 manuals correctly, the way this would be set up
> is to use the DB15/DB9 cable provided with the XV144 to connect the K3 to
> the KRC2 "XCVR" DB9 connector and then use a DB9/DB9 straight-through cable
> to connect the XV144 to the KRC2 "PC" port.  Is that correct?
>
> It seems a bit strange that the KRC2 kit doesn't provide a DB15 connector as
> well as a DB9 for making up the control cable.
>
>