[Elecraft] Headphones & Speaker settings - no speaker OP

[Don Wilhelm]

Ron,

Have you removed the top cover to check that the speaker connector is 
plugged in.  If not, that is the first thing I would check.

73,
Don W3FPR

On 7/25/2011 5:26 PM, Ron N5QQ wrote:
> I have two K3's on the operating desk that are very similar except in
> one way and I can not fine the setting or configuration to correct it.
> At present both the rigs are set SPKRS+PH = NO and SPKRS = 1. This
> gives me the internal speaker only when headphones are not plugged in,
> and then headphones only (no speaker) when they are plugged in.
> BUT the LH rig gives me headphones when they are plugged in (no
> speaker) and NOTHING at all when the headphone jack is unplugged. This
> is acting like I have external speakers plugged in, which I don't
> have. Am I missing something obvious?
> At this time there is no SO2R mic/phones/cw controller involved and
> the only other connection is the interface to my PC (with N1MM).
> Ron
>