[Elecraft] HW-101

[John Ragle]

Having read through the EHAM reviews of the HW-101 (about 4 or 5 pages) 
there seem to be no comments about CHIRP during CW operation, although 
the general drift is that the rig is a dog on CW in general.

I wonder if your problem with chirp could be due to a seriously (VERY 
SERIOUSLY)  out-of-spec power supply? Easy to check during keying by 
looking at the power supply voltages. If the power supply is an 
original, probably the filter caps are in need of replacing (at least).

I ran an SB401 for several years 'way back then, and never had the 
slightest problem with chirpy keying.

John Ragle -- W1ZI

=====

On 7/25/2011 2:25 PM, Tony Morgan wrote:
> Mike,
> Would that be plain or Bar-b-Que? ;-)
>
> 73,
>
> Tony W7GO
>
> On 7/25/2011 11:09 AM, vicki glover wrote:
>> Guys,
>> I know this probably is wrong place to be asking questions about the heathkit, but, I'm desperate!  Anybody have any suggestions to correct "chip" in cw transmission?
>> 73
>> mike-kb3qja
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>