[Elecraft] P3 for other uses

[n5ge at n5ge.com]

I have considered using the P3 with my mobile K3 for noise hunting, but my
thought was to use it with a K3, not with a direct input to the P3 from an
antenna.  I think that might be a good idea if you ran across a strong signal.

73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member


On Sat, 23 Jul 2011 11:56:35 -1000, Merv Schweigert <k9fd at flex.com> wrote:

>Has anyone used the P3 for an "external" signal finding or noise
>finding tool?
>I was wondering if a tuned circuit for 1.8 mhz fed into the input
>with the IF set for 1.8 would be enough to show any signal?
>
>I need to locate a signal on 160 meters that is caused by two BC
>stations mixing due to a connection being made when the wind
>blows and something contacts and creates a "diode" in my antenna/ground 
>system.
>
>Thanks  73 Merv K9FD/KH6
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html