[Elecraft] P3 for other uses

[Vic K2VCO]

Yes, it would probably work. But I recall reading a note from Eric that there is no static 
protection for the 'antenna' input and it is /very/ easy to blow the front end connecting 
it to external things -- so be careful.

On 7/23/2011 2:56 PM, Merv Schweigert wrote:
> Has anyone used the P3 for an "external" signal finding or noise
> finding tool?
> I was wondering if a tuned circuit for 1.8 mhz fed into the input
> with the IF set for 1.8 would be enough to show any signal?
>
> I need to locate a signal on 160 meters that is caused by two BC
> stations mixing due to a connection being made when the wind
> blows and something contacts and creates a "diode" in my antenna/ground
> system.
>
> Thanks  73 Merv K9FD/KH6
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/