[Elecraft] K3 utility - RestorePower: Unexpected response 'PC008; ' to 'PC; '. State 87

[Shane]

Nevermind. I ran it a second time with advanced and verbose logging
and it worked fine.

Thanks,

On Sat, Jul 23, 2011 at 3:42 PM, Shane
<software.research.development at gmail.com> wrote:
> I'm doing the calibration step in the "TX Gain Calibration" section. I
> hook my mac up to the K3 via the serial to USB cable, attach the dummy
> load, run the K3 utility (Calibration->Calibrate Transmitter Gain),
> and get the following results.
>
> ---
> Starting 5 watt calibration.
> Calibrating at 1.900 MHz
> Calibrating at 3.750 MHz
> Calibrating at 5.366 MHz
> Calibrating at 7.150 MHz
> Calibrating at 10.125 MHz
> Calibrating at 14.200 MHz
> Calibrating at 18.110 MHz
> Calibrating at 21.200 MHz
> Calibrating at 24.930 MHz
> Calibrating at 29.000 MHz
> Calibrating at 52.000 MHz
> RestorePower: Unexpected response 'PC008;' to 'PC;'. State 87. Retrying
> RestorePower: Unexpected response 'PC008;' to 'PC;'. State 87. Retrying
> RestorePower: Unexpected response 'PC008;' to 'PC;'. State 87. Retrying
> RestorePower: Unexpected response 'PC008;' to 'PC;'. State 87. Retrying
> RestorePower: Unexpected response 'PC008;' to 'PC;'. State 87. Retrying
> RestorePower: Unexpected response 'PC008;' to 'PC;'. State 87
> 5 watt calibration failed.
> Elapsed time: 47.5 secs
> ---
>
> So I'm trying to confirm what the TX mode is, as I see this note in
> the K3 utility help.
>
> "Transmitter Gain Calibration requires that the K3 be in TX NORMal,
> not TX TEST mode."
>
> Anyone know where this TX mode of normal and test is?
>