[Elecraft] XV-144 Receiver RF Amp Bias Adjustments

[Don Wilhelm]

Dave,

Yes, you should read 6.8 volts to ground at the C4 D3 junction.

Make certain you have voltage at both ends of R15.  If you do, then 
check the soldering carefully in the upper left quadrant of the board.

73,
Don W3FPR

On 7/23/2011 1:00 AM, KJ4YQK wrote:
> R13 is not adjusting anything.  0 volts.  I was wondering what to look for.
> Has anybody experience this, and what is the corrected action.
> What voltage should I read at C4 D3 junction.  Should it be 6.8 volts?
>
> Thanks Dave
>