[Elecraft] KPA500 #212

[Ken Chandler]

Hi all
My KPA-500 sn 0212 got delivered on Monday afternoon by UPS, started Tuesday morning on assembly all went well except some flat head screws were missing but a quick email and Gary had the small screws enroute.
The Aux cable is a must have and the K3 and KPA500 talking to one another!!! Nicely.
I'm utterly amazed at how quiet the amp is.
I have FN-1 running on the K3 and that's louder than the amp.
Congratulations on the excellent engineering, an absolute work of art.
So the K-Line is alive!!
A K-line pin would be nice!!!


Ken..G0ORH  K2, K3, P3, KPA500.

Sent from my iPhone


     


On 21 Jul 2011, at 15:35, Stephen Springer <sbsinnc at gmail.com> wrote:

> Received #203 on Wednesday at 1 PM, kit complete at 6:30 PM.  All went
> smoothly with only a few flat head screws missing from inventory.  Send note
> to Elecraft on those items and proceeded to setup amplifier in shack. Jumped
> on 160m with my regular group on 1905 and got several excellent reports over
> my previous signal using the Flex 5000 barefoot.
> 
> So it works as advertised and was a dream to assemble and operate.  Well
> done Elecraft!
> 
> Steve Springer K3NPK
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html