[Elecraft] mating K3 to 9500

[W0FK]

I didn't look into trying to interconnect the 9500 and the K3 to get band
data. All it takes is an RCA patch cord between the relay out and in plugs
on both units, and away you go. The RF sensing is very fast on the 9500 and
pretty painless.

73,

Lou, W0FK 


Dick Hanson wrote:
> 
> Hello....
> I've not found any hints in archives on this, so wondering if anyone here
> has done this?
> If so, cabling and any other handy hints would be appreciated.
> I would much rather have the amp follow the radio thru commands and not
> via
> RF sensing.
> Thanks.
> 73
> Dick, K5AND
> Austin
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


-----
St. Louis, MO
K3 #2513, P3 #620
--
View this message in context: http://elecraft.365791.n2.nabble.com/mating-K3-to-9500-tp6604121p6605208.html
Sent from the Elecraft mailing list archive at Nabble.com.