[Elecraft] K2 Question

[Johnny Siu]

Hello Alan,
 
If you are mostly CW, 15 watt output from K2 would be adequate for most of the cases.  I find the K2+KAT2 combination is very good  for field day because of the low standby current.
 
However, KX3 will be on the pipe line and offers similar or better performance.  It will depend on whether you really like a through hole soldering kit.  If yes, go for K2.

TNX & 73,


Johnny VR2XMC

從︰ "ARDUJENSKI at aol.com" <ARDUJENSKI at aol.com>
收件人︰ elecraft at mailman.qth.net
傳送日期︰ 2011年07月20日 (週三) 12:10 PM
主題︰ [Elecraft] K2 Question

QUESTION: For those who have only one radio to use for base station and  
occasional field operations have you found the K2 to be more than adequate or 
do  you recommend the K2/100 with external ATU? I am a casual operator; both 
CW  (90%) and SSB (10%).

Do those of you who have or had  the K2/20 have regrets not getting  the 
K2/100?

Thank you in advance for your feedback

Alan KB7MBI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html